×
Copyright © Sankyo Tateyama,lnc. All Rights Reserved.
×
Non-caster type that doesn't worry about the floor finish. It allows for smooth opening and closing.
The non-caster type can accommodate opening widths of up to 43S for single and up to 86W for double.
Non-caster type only.
The maximum tilt angle is 5° to 2.6°(depending on sizes) for single when using long post (option).
Non-caster type only.
The caster wheel comes out and touches the ground when the gates is fully extended, to support the front end and easy docking when closing the gate.
The easy to operate grip-handle prevents crime with a dimple-key lock.
Dimple key cylinder helps more safety.
Easy to operate sturdy lockdown sticks can be released at intervals to secure the gates in the closed position.
To prevent injury, resin caps are attached to the bottoms of the gate lattices.
It reduces door shaking.
Rotate the gate and attach it to the post. When closing, the gates can turn 180°around the post completely out of the way.
The front caster can also be installed on 13S to 43S sizes.
Installation is not possible after construction.
